Basic Plumbing Maintenance to Prevent Emergency Service

plumber services in singapore

The regular maintenance of your plumbing system at home helps prevent the need for large-scale repairs that are honestly way more expensive than the previous option. You can follow some do-it-yourself tips online or opt for the readily available plumbing services in Singapore. To give you an idea of how to do a maintenance check, here’s some professional tips for beginners:


  1. To check for leaks, open the lid of the toilet’s tank.
  2. If the water’s filling up the overflow pipe, adjust the fill valve until the water level’s an inch below the upper tip of the said pipe.
  3. Put a few drops of food colouring in the tank. Wait for 15 minutes.
  4. After waiting, check to see if the toilet bowl’s water is still clear or has changed colour.
  5. If the food colouring seeped through the toilet bowl’s water, it’s time to replace the flapper because it’s leaking. If the colour didn’t change, move on to the next step.


If you are unaware of the items mentioned above or how to adjust the fill valve itself, there is a plumber service in Singapore that can assist you any time of the day.



  1. Is the showerhead not performing its best? It’s probably clogged with mineral deposits. Grab some duct tape and channel-type pliers and be ready for some real plumbing.
  2. Put duct tape on the teeth of the pliers to avoid any scratches.
  3. Unscrew the swivel ball nut.
  4. Unscrew the collar nut.
  5. With a thin wire, gently clean the inlet and outlet holes of the showerhead.
  6. Put the showerhead under running water to flush out the accumulated dirt.
  7. Immerse the showerhead in vinegar to remove the mineral deposits. Leave it overnight.
  8. Reassemble the parts.



  1. Does the faucet have low water pressure or is the handle leaking? Ready some duct tape and a pair of pliers, a small brush, and vinegar because it’s time to clean the aerator.
  2. Remove the aerator from the faucet either by hand or with the pair of pliers.
  3. After removal, dip the small brush in vinegar.
  4. Brush the aerator to remove accumulated dirt.
  5. Rinse the aerator with clean water.
  6. Reassemble the parts.



  1. Regularly take off the strainers on the sinks, showers, and tubs as these things accumulate dirt and other solid matters that slow down the water pouring down the drain. Prepare a trash bin, a water source, a toothbrush, and dish soap.
  2. Tap the strainer on the interior edge of the trash bin to remove the solid matters.
  3. Rinse the strainer using the water source. It can be water from a hose or a dipper.
  4. Put dish soap on the toothbrush.
  5. Brush the strainer, then rinse.


Repeat these simple steps on a regular basis to maintain the plumbing system in your home. After all, plumbing services in Singapore are just around the corner or you can use your free time to make sure your plumbing’s in good condition. Go back to these instructions for guidance or consult a plumber. Their services extend beyond these tips.